Forklifts
XC Lithium Electric Forklift, 1.5 to 3.8 t
1.5 - 3.8 t · 18 models
Electric
View range Request a quote
Forklifts
XC 3-Wheel Lithium Electric Forklift, 1.3 to 2 t
ElectricSale and rental
- Capacity
- 1.3 - 2 t
- Specifications by model
- 10 models
The XC 3-wheel range covers 10 lithium-battery electric forklift models from 1.3 to 2 t capacity. The trucks use lithium cells co-developed by HANGCHA and CATL, offered with two motor configurations (asynchronous AC or permanent-magnet synchronous). Compact and emission-free, they suit warehouse handling, narrow aisles and indoor environments. Available for sale and for rental.
- 10 models from 1.3 to 2 t, lithium electric drive
- HANGCHA/CATL lithium battery, 4000 full charge cycles with at least 75% residual capacity
- Maintenance-free battery with no gas emission, noise as low as 73 dBA
- Compact 3-wheel format with over 50% more operating space than a traditional 3-wheel truck
Distributed brand : Hangcha
The needs assessment is free and without obligation.
Download the spec sheet (PDF)Specifications by model
| Model | CPDS13-XCC2G-SI | CPDS15-XCC2G-SI | CPDS16-XCC2G-SI | CPDS18-XCC2G-SI | CPDS20-XCC2G-SI | CPDS13-XCY2G-SI | CPDS15-XCY2G-SI | CPDS16-XCY2G-SI | CPDS18-XCY2G-SI | CPDS20-XCY2G-SI |
|---|---|---|---|---|---|---|---|---|---|---|
| Distinguishing mark | ||||||||||
| Manufacturer | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. | HANGCHA GROUP CO.,LTD. |
| Manufacturers type designation | CPDS13-XCC2G-SI, CPDS13-XCD8G-SI, CPDS13-XCD8B1-SI | CPDS15-XCC2G-SI, CPDS15-XCD8G-SI, CPDS15-XCD8B1-SI | CPDS16-XCC2G-SI, CPDS16-XCD8G-SI, CPDS16-XCD8B1-SI, CPDS16-XCD8G-SIF2 | CPDS18-XCC2G-SI, CPDS18-XCD8G-SI, CPDS18-XCD8B1-SI | CPDS20-XCC2G-SI, CPDS20-XCD8G-SI, CPDS20-XCD8B1-SI, CPDS20-XCD8G-SIF2, CPDS20-XCD8G-SIA* | CPDS13-XCY2G-SI, CPDS13-XCY2B1-SI, CPDS13-XCY2G-SIF2 | CPDS15-XCY2G-SI, CPDS15-XCY2B1-SI, CPDS15-XCY2G-SIF2 | CPDS16-XCY2G-SI, CPDS16-XCY2B1-SI, CPDS16-XCY2G-SIF2 | CPDS18-XCY2G-SI, CPDS18-XCY2B1-SI, CPDS18-XCY2G-SIF2 | CPDS20-XCY2G-SI, CPDS20-XCY2B1-SI, CPDS20-XCY2G-SIF2 |
| Drive: electric (battery or mains), diesel, petrol, fuel gas | electric | electric | electric | electric | electric | electric | electric | electric | electric | electric |
| Operator type: hand, pedestrian, standing, seated, order-picker | seated | seated | seated | seated | seated | seated | seated | seated | seated | seated |
| Load capacity/rated load(kg (Q)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Load centre distance(mm (c)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Load distance, centre of drive axle to fork(mm (x)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Wheelbase(mm (y)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Weight | ||||||||||
| Service Weight(kg) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Axle loading, laden front/rear(kg) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Axle loading, unladen front/rear(kg) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Tyres, chassis | ||||||||||
| Tyres: solid rubber, superelastic, pneumatic, polyurethane | solid | solid | solid | solid | solid | solid | solid | solid | solid | solid |
| Tyre size, front | 18x7 - 8 | 18x7 - 8 | 18x7 - 8 | 18x7 - 8 | 200/50-10 | 18x7 - 8 | 18x7 - 8 | 18x7 - 8 | 18x7 - 8 | 200/50-10 |
| Tyre size, rear | 15x4.5 - 8 | 15x4.5 - 8 | 15x4.5 - 8 | 140/55-9 | 140/55-9 | 15x4.5 - 8 | 15x4.5 - 8 | 15x4.5 - 8 | 140/55-9 | 140/55-9 |
| Wheels, number front rear (x = driven wheels) | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 | 2x/2 |
| Tread, front(mm (b10)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Tread, rear(mm (b11)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Dimensions | ||||||||||
| Tilt of mast/fork carriage forward/backward(Grad) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Height, mast lowered(mm (h1)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Free lift(mm (h2)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Lift(mm (h3)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Height, mast extended(mm (h4)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Height of overhead guard STD.(Cabin)(mm (h6)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Seat height/stand height(mm (h7)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Coupling height(mm (h10)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Overall length(mm (l1)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Length to face of forks(mm (l2)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Overall width(mm (b1)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Fork dimensions(mm (s/e/l)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Fork carriage DIN 15 173 --- ISO 2328, class/type A,B | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A | ISO2328 2A |
| Fork-carriage width(mm (b3)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Distance between fork-arms(mm (b5)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Ground clearance, laden, below mast(mm (m1)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Ground clearance, centre of wheelbase(mm (m2)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Aisle width for pallets 1000 x 1200 crossways(mm (Ast)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Aisle width for pallets 800 x 1200 lengthways/crossways(mm (Ast)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Turning radius(mm (Wa)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Performance data | ||||||||||
| Travel speed, laden/unladen(km/h) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Lift speed, laden/unladen(mm/s) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Lowering speed, laden/unladen(mm/s) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Drawbar pull, laden/unladen(N) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Max. Drawbar pull, laden/unladen(N) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Gradeability, laden/unladen(%) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Max. gradeability, laden/unladen(%) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Acceleration time, laden/unladen (0-10m)(s) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Service brake | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Parking brake | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical | Mechanical |
| Electric-engine | ||||||||||
| Drive motor rating S2 60 min(kW) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Lift motor rating at S3 15%(kW) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Battery acc. to DIN 43 531/35/36 A,B,C, no | no | no | no | no | no | no | no | no | no | no |
| Battery voltage, nominal capacity K5(V/Ah) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Min. battery weight(kg) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Max. battery weight(kg) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Type of drive control | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC | MOSFET/AC |
| Additional data | ||||||||||
| Operating pressure for attachments(bar) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Oil volume for attachments(l/min) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Sound level at the driver's ear according to EN / DIN 12 053(dB(A)) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
| Towing coupling, type DIN | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin | Φ24 Pin |
| Hydraulic Tank - capacity (drain & refill)(liter) | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ | ‑ |
Hangcha manufacturer specifications, given per model and subject to change; final figures are confirmed in your quote.
Highlights
- Covers models with a tonnage of 1.3t, 1.5t, 1.6t, 1.8t and 2.0t; new XC series three-point new energy electric forklifts, HANGCHA's dedicated-purpose battery forklifts
- Equipped with dedicated lithium battery cells and modules developed jointly by HANGCHA and CATL
- High lifting speed, high driving speed, excellent ergonomic design, easy operation, high safety
- Advancement: high-frequency MOSFET integrated controller; regenerative braking, reverse braking, anti-sliding on ramps
- Ultra-high power AC drive motor with bridge structure; ultra-high power AC oil pump motor
- Noise can be as low as 73dBA
- Comfort: low center of gravity and good stability; intelligent sensing buffered descending (fork 100-60mm from ground auto-slows)
- Silence, no pollution, energy saving; large-screen LED instruments
- Excellent ergonomic design: operation space more than 50% larger than traditional three-point electric truck
- Enlarged brake pedal and regenerative braking reduce driver fatigue
- Optional integrated fingertip operating system via CAN bus (emergency shut-off, horn, quadruple thumb switches)
- Easy operations and maintenance: fully sealed hood and side plates seal components from dust and water
- Hood with self-locking gas spring opens at large angle for battery maintenance/replacement
- Overhead dashboard placed for easy visibility; battery packs removable by manual or electric cart
- Wide-view mast with optimized design; enlarged fork carriage opening; high fulcrum tilt cylinder
- Tilt-adjustable small-diameter steering wheel; seat adjustable back and forth by 210mm
- Lithium battery: 4000 full charging cycles with at least 75% residual capacity
- Li-Ion maintains high performance below freezing; opportunity/interim charging without service life impact
- Maintenance free (no water topping or acid checks); no emission of battery gasses; high energy density
- HANGCHA BMS monitors cells at all times; overcharge/over-discharge, overcurrent/over-temp/low-temp protection
- Battery temperatures: charging -30C~65C, discharge -30C~65C, storage -30C~65C
- CE certified; main electrical components (motor controller, contactor, power plug, emergency cut-off, dashboard, accelerator) from well-known foreign brands
- Electronic and hydraulic overload protection; emergency cut-off switch complies with European safety regulations
Standard equipment
- Dual AC drive motors
- High-power AC oil pump motor
- Silent gear pump
- Multi-function color screen instrument cluster
- Large integral rubber pedal pad
- Stamped iron hood, stamped iron side plates
- Stamped stainless steel boarding step
- Handbrake with a touch-proof mechanism
- Turning deceleration function
- Fork descending buffering
- SPE power selection
- Mileage display, operating time display
- Integrated fuse box
- DC-DC converter
- Doublet multiway valve
- Emergency shut-off switch
- Reversing buzzer
- Traction pin
- Load sensing steering system
- Standard duplex mast, fork, fork carriage and load backrest
- Lithium packs with low temperature electric heating systems
- The gas spring of the hood with a touch-proof mechanism
- LED combination headlights, LED combination three-color tail lights
- Charging muzzle meeting national standards
Options
- Lithium packs that can be replaced quickly
- Start with a PIN code or by swiping a card
- Ultra-elastic solid nose tire
- Environmentally-friendly colored solid tire
- Left and right rearview mirrors
- Reversing video
- Front/rear blue lights
- Rear operation lights
- Cold storage truck
- Reverse armrest (containing a horn button)
- Fully enclosed cab
- OPS seat sensing function
- Fork ascending buffering
- Triple multiway valve
- Quadruple multiway valve
- Quintuple multiway valve
- Widened / heightened load backrest
- Widened fork carriage
- Forks of other lengths
- Full free duplex mast
- Full free triplex mast
- Integrated side shifter
- Attachments of other specifications
- Grammer MSG531 suspended seat
- Dedicated lithium battery charger
- Integrated fingertip control system including ergonomic armrests
- Toolbox, folder
- Two spec tables published: asynchronous AC induction motor (CPDS..XCC2G/D8G/D8B1..) and Permanent magnet synchronous (CPDS..XCY2G/Y2B1..). Only the Lift motor rating at S3 15% differs: 15 AC (asynchronous) vs 11AC (permanent magnet synchronous); all other spec values are identical per tonnage.
- Controller codes: D8G/B1 means Inmotion controller; C2G means Curtis controller; Y2G/B1 means Enpower controller.
- F2: cold storage truck model F2 suitable for use in cold storage environments down to -30 C (variants ...SIF2).
- A: Anti-corrosion protection; type A (CPDS20-XCD8G-SIA*) suitable for environments with C5-I and C5-M ratings.
- Battery options - CATL (asynchronous & PMS): capacities 228 Ah, 302 Ah, 375 Ah across 1.3-1.5t / 1.6-1.8t / 2.0t groups (standard vs optional per note).
- Battery options - EVE (asynchronous & PMS): capacities 230 Ah, 280 Ah, 304 Ah, 460 Ah across 1.3-1.5t / 1.6-1.8t / 2.0t groups.
- Battery capacity legend: filled dot = standard capacity; open circle = optional capacity; / = not available.
- Mast specification (page 6, load center @500mm). 2-stage wide view mast (M250-M450): free lift 140mm all; tilt F/R 7/6 deg. Lifting height 2500-4500mm; lowered overall height 1738-2838mm.
- 2-stage full-free lifting mast (U250-U400): tilt 7/6 deg; lifting height 2500-4000mm; free lift with backrest 793-1593mm.
- 3-stage full-free lifting mast (N400-N650): tilt F/R 3.5/5 deg; lifting height 4000-6500mm; lowered overall height 1888-2788mm.
- Mast capacity derates at higher lift heights and tonnages (see details.md full mast table).
- With sideshifter minus 200kg; with integrated sideshifter minus 100kg.
- AST formula: AST = a + Wa + sqrt((X+B)^2 + (W/2)^2), with a = 200mm.
- HANGCHA GROUP CO., LTD. reserves the right to make changes without notice concerning colors, equipment, or specifications; colors of trucks delivered may differ slightly from brochures.
- Conforms to European Safety Requirements. ISO9001:2015, ISO14001:2015, ISO45001:2018.
From the same category
Forklifts
X Series Diesel / LPG Forklift, 1.5 to 3.8 t
1.5 - 3.8 t · 10 models
Diesel / LPG
View range Request a quote
Tell us what you need
Purchase, rental, maintenance or repairs: describe your project and our team will assess your needs free of charge and point you to the right solution.
Blog
Guides & tips
Practical guides to help you choose, run and maintain your handling equipment.
